Camburg Engineering
Camburg Engineering CAM-310133-U Lift Kit with FOX 2.5 Shocks for 2000-2006 Toyota Tundra (2WD and 4WD)
Camburg Engineering CAM-310133-U Lift Kit with FOX 2.5 Shocks for 2000-2006 Toyota Tundra (2WD and 4WD)
Couldn't load pickup availability
Camburg Engineering CAM-310133-U Performance Lift Kit with FOX 2.5 Shocks, for 2000-2006 Toyota Tundra.
Utilizing FOX 2.5 Factory Series DSC Remote Coilovers, valved specifically for your application, we are able to gain 2-3 inches of lift and increase wheel travel as well.
Key Features
- These Factory Series shocks feature a smooth-bore, clear coated, zinc plated, honed seamless alloy body, black anodized 6061-T6 billet aluminum components, a 7/8" hard chrome plated heat treated alloy steel shaft and an external reservoir design to separate shock oil from the high-pressure nitrogen
- Each application has been rigorously tested by FOX engineers to maximize suspension travel and performance on and off the road
- These shocks also have FOX's DSC compression adjusters that allow for both high and low speed compression circuit adjustment to really get the ride dialed in for you
- That way you can have it soft for the street and firm it up when you go off-road
- After lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance
- Our uniball upper arms address these issues and more
- Replacing the stock ball-joint with a uni-ball bearing, we can increase wheel travel with a part that is considerably stronger and will last longer under extreme conditions
- We also engineered the arms with more caster and changed the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling both on and off-road
Fits These Vehicles
- Fits 2000-2006 Toyota Tundra
Confirm the model year, the trim and the part number against your vehicle before ordering.
Camburg Engineering warrants its non-wearable suspension components against defects in material and workmanship with a limited lifetime warranty for the original purchaser under normal use and service. Wearable parts such as uniballs, heim joints, bushings, bump stops and ball joints are covered for 60 days from the date of purchase, and coatings and finishes are covered for 12 months against structural corrosion and manufacturing defects. Improper installation, alteration, commercial vehicle use, racing or competitive use, normal wear, and labor, alignment and shipping costs are not covered. The shocks supplied with this kit are covered by the shock manufacturer's own warranty.
Specifications
- Brand: Camburg Engineering
- Manufacturer Part Number: CAM-310133-U
- Type: Lift Kit
- Manufacturer Warranty: Limited Lifetime Warranty (wearable parts 60 days)
- Condition: New
Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
๐ก๏ธ
Manufacturer's Warranty โ Camburg Engineering
โพ
Manufacturer's Warranty โ Camburg Engineering
Camburg Engineering warrants its suspension products against defects in material and workmanship for as long as the original purchaser owns the vehicle on which they were originally installed, provided they are installed properly on the vehicle they were designed for. Non-wearable parts made by Camburg carry a limited lifetime warranty for the original owner under normal use and service. Wearable parts — including bushings, bump stops, rubber or plastic components, bearings, tie rod ends, uniballs, heim joints and ball joints — are covered for 60 days from the date of purchase against manufacturing defects. Coatings and finishes are covered for 12 months against structural corrosion and manufacturing defects; scratches, fading, surface corrosion and other cosmetic issues are not. Not covered: parts that have been altered; damage from incorrect installation, misuse, neglect, improper maintenance or accidents; products installed on commercial vehicles; any use during racing or competitive events; normal wear and tear; and costs other than the part itself, including labor, alignment, shipping and vehicle downtime. Parts in a kit that Camburg does not make, such as FOX or King shocks, are covered by that manufacturer’s own warranty. To make a claim, present the warranty certificate and proof of purchase to Camburg or to the seller you bought the part from, and return the original part in exchange for a new part of the same part number; each claim is decided case by case at Camburg’s discretion. For Camburg parts bought from PitStopTuning, start your claim with us.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!