Dinan
Dinan 11-19 BMW 528i/535i/550i/640i/650i (F06/F10/F12/F13) Negative Camber Control Arms - Front
Dinan 11-19 BMW 528i/535i/550i/640i/650i (F06/F10/F12/F13) Negative Camber Control Arms - Front
Couldn't load pickup availability
Negative Camber Control Arms provide a remarkable reduction of understeer and more immediate turn-in by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively. This increase in negative camber is accomplished in two ways. The shorter front upper control arm increases camber gain which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition, the static negative camber or the amount you will see on your alignment readout is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.
A quick look at your front tires will tell the story. If you are noticing significant outside edge front tire wear perhaps even a bit of ''cupping'' you are definitely a candidate for the Negative Camber Control Arms. Not only will the extra camber improve the handling but you'll also likely notice more even tire wear assuming you continue to corner aggressively.
Features
- Replaces front upper control arms with ones that increase negative camber by -0.5 degrees
- Evens out tire wear during aggressive cornering
- Improves grip of front tires
Vehicle Fitment
Fits 1 make, 2009-2019 — click to view all 29 models
- 2012-2016 BMW 528i
- 2012-2016 BMW 528i xDrive
- 2011-2016 BMW 535i
- 2010-2017 BMW 535i GT
- 2011-2017 BMW 535i GT xDrive
- 2011-2016 BMW 535i xDrive
- 2011-2016 BMW 550i
- 2010-2015 BMW 550i GT
- 2010-2017 BMW 550i GT xDrive
- 2011-2016 BMW 550i xDrive
- 2012-2018 BMW 640i
- 2013-2019 BMW 640i Gran Coupe
- 2014-2018 BMW 640i xDrive
- 2014-2019 BMW 640i xDrive Gran Coupe
- 2012-2018 BMW 650i
- 2013-2019 BMW 650i Gran Coupe
- 2012-2018 BMW 650i xDrive
- 2013-2019 BMW 650i xDrive Gran Coupe
- 2013-2015 BMW 740Li
- 2013-2015 BMW 740i
- 2009-2015 BMW 750Li
- 2010-2015 BMW 750Li xDrive
- 2009-2015 BMW 750i
- 2010-2015 BMW 750i xDrive
- 2010-2015 BMW 760Li
- 2011-2015 BMW Alpina B7
- 2011-2015 BMW Alpina B7 xDrive
- 2011-2015 BMW Alpina B7L
- 2011-2015 BMW Alpina B7L xDrive
Please verify exact fitment (engine, submodel, and trim) before purchasing.
Manufacturer Part Number: D160-0006
Images are for illustration purposes only; actual product may vary.
⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Dinan
▾
Manufacturer's Warranty — Dinan
Dinan warrants its Performance Products to be free from defects in materials and workmanship, and the term depends on the car. If the vehicle is still covered by the original manufacturer's new car limited warranty (4 years or 50,000 miles — 80,000 km in Canada — from first retail sale; US and Canadian specification vehicles only), the Dinan part is covered for the remaining term of that new car warranty, and an Authorized Dinan Dealer repairs or replaces the defective Dinan component without charge for parts or labor, including any original manufacturer component directly affected by it. If the car is out of its new car warranty, Dinan Performance Products carry a 2-year, unlimited mileage warranty from the date of original purchase; labor is reimbursed at the dealer's standard flat-rate, but repairs to affected original manufacturer components are not reimbursed. DINANTRONICS Sport, DINANTRONICS X and DINANFLASH handheld units are 1 year, unlimited mileage; refurbished products are 90 days; and racing-only parts are guaranteed against defects in workmanship only — they are not warranted against wear or failure and may affect the BMW factory and emissions warranty. Dinan's warranty is transferable when the vehicle it was installed on is sold. A lawful invoice as proof of purchase is required, and the defective part must be returned to Dinan for verification before any adjustment. Not covered: return shipping, towing and rental car charges; unauthorized modification of a Dinan part, or damage from using other manufacturers' products alongside Dinan systems; non-DCT clutch assemblies, brake rotor warp and friction materials; maintenance items such as spark plugs, filters, lubricants, fluids, coolant, drive belts and light bulbs; negligence, abuse or improper installation; engine damage from altering Dinan's original boost pressure; improper or contaminated fuel; collision damage; environmental damage, flood, fire or road-salt corrosion; and any vehicle operated in a competitive event or subjected to aggressive track conditions. The warranty is void if the VIN or odometer has been altered, if the vehicle was declared a total loss or salvage, or if it has been used in competition. Note that installing performance products may affect the vehicle manufacturer's own new car warranty. Because Dinan handles claims through an Authorized Dinan Dealer, if you bought it here, contact PitStopTuning and we'll file the claim with Dinan for you rather than approaching Dinan directly.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!