Skip to product information
1 of 12

Dinan

Dinan 18-23 BMW M5 (F90) Free Flow Axleback Exhaust System - Polished Tips

Dinan 18-23 BMW M5 (F90) Free Flow Axleback Exhaust System - Polished Tips

Regular price $ 2,699.95
Regular price $ 2,969.95 Sale price $ 2,699.95
✓ In Stock • Ready to Ship
Shipping calculated at checkout.
Quantity
Ships from Dinan — this item ships direct from the manufacturer. It usually goes out quickly, but because it leaves their warehouse rather than ours, delivery can take a little longer than our in-stock parts.

In order to achieve desired sound volume and tone, Dinan felt becoming of the F90 M5 the tubing was enlarged to 83mm (vs 80mm stock) to allow freer flow throughout the entirety of the system. The larger tubing is fed into a muffler that is typical of all Dinan exhaust design and utilizes absorption and reactive technologies designed to improve exhaust flow and reduce backpressure. The combination results in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. This is partly courtesy of the retained computer-controlled exhaust valves that limit noise during low-speed driving and open fully during high-load conditions to allow free flow and greater sound as the bulk of the gases are bypassing the muffler. Like all Dinan exhausts, our M5 free flow exhaust is engineered to reduce low-RPM drone so the cabin of the vehicle is still intimate and not drowned in an excessively loud tone. With the Dinan exhaust equipped on the M5 you get the best of both worlds; aggressive tone/sound and civility. A combination that we have termed internally as "refined aggression."

Sound isn't the only aspect of the exhaust that has been modified. The Dinan F90 M5 exhaust has been skillfully crafted entirely out of T304 stainless steel and TIG welded for the best visual appearance and color. The entire system is then brush finished to further guarantee an immaculate looking system out of the box. The attention to detail is not limited to parts of the system you can't see once the exhaust is installed but is also extended to the exhaust tips themselves. The Dinan exhaust sports enormous, quad 4" (102mm) clamp-on, double-walled, polished and laser engraved exhaust tips. Dinan has retained its signature straight-cut tip design, safeguarding its unique and elegant styling position amongst a crowded marketplace full of angle cuts. The tips masterfully fill up and accentuate upon the factory cut-outs showcasing an extremely aggressive, yet refined, styling that will turn heads even before it is heard.

The F90 M5 has impressed users and critics alike with its awe-inspiring power, effortless delivery, and general embodiment of what BMW has always been about - refined performance. Form and function reign supreme from the factory in true German form. On the other hand, other aspects may not be as carefully cultivated. The stock exhaust note on the F90 M5 as an example, while no slouch, is probably best described as having a subdued aggressive note. Dinan believes for such a powerful and impressive car however that the vehicle deserves to be able to bellow a bit louder and more aggressively. The F90 M5 is the alpha on the public roads after all. Dinan's goal is to let the machine sound the part in addition to performing it. With Dinan, there is no reason to sacrifice anything in the process to meet that goal either. Whether that be in the form of drone, civility, appearance or any other aspect.

Features

  • Stock exhaust valve actuators reused and operation of exhaust valve is unchanged so exhaust tone can be adjusted via the M-drive settings
  • Computer controlled exhaust valves are retained and limit noise during low speed driving and open fully during high-load conditions
  • Twin secondary exhaust valves are a whopping 76mm diameter, making them 30% less restrictive than the OE valves
  • Four massive 4" diameter clamp-on, double-walled, polished and laser engraved exhaust tips
  • Easy bolt-on installation with included mounting hardware
  • Larger diameter piping for increased flow (83mm vs 80mm)
  • More Power: + 6 HP @ 6600 RPM, + 5 LB-FT @ 6600 RPM
  • 100% 304 stainless steel construction
  • Enjoyably louder, sportier sound

Vehicle Fitment

  • 2018-2023 BMW M5

Please verify exact fitment (engine, submodel, and trim) before purchasing.

Manufacturer Part Number: D660-0079

Images are for illustration purposes only; actual product may vary.

⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer's Warranty — Dinan

Dinan warrants its Performance Products to be free from defects in materials and workmanship, and the term depends on the car. If the vehicle is still covered by the original manufacturer's new car limited warranty (4 years or 50,000 miles — 80,000 km in Canada — from first retail sale; US and Canadian specification vehicles only), the Dinan part is covered for the remaining term of that new car warranty, and an Authorized Dinan Dealer repairs or replaces the defective Dinan component without charge for parts or labor, including any original manufacturer component directly affected by it. If the car is out of its new car warranty, Dinan Performance Products carry a 2-year, unlimited mileage warranty from the date of original purchase; labor is reimbursed at the dealer's standard flat-rate, but repairs to affected original manufacturer components are not reimbursed. DINANTRONICS Sport, DINANTRONICS X and DINANFLASH handheld units are 1 year, unlimited mileage; refurbished products are 90 days; and racing-only parts are guaranteed against defects in workmanship only — they are not warranted against wear or failure and may affect the BMW factory and emissions warranty. Dinan's warranty is transferable when the vehicle it was installed on is sold. A lawful invoice as proof of purchase is required, and the defective part must be returned to Dinan for verification before any adjustment. Not covered: return shipping, towing and rental car charges; unauthorized modification of a Dinan part, or damage from using other manufacturers' products alongside Dinan systems; non-DCT clutch assemblies, brake rotor warp and friction materials; maintenance items such as spark plugs, filters, lubricants, fluids, coolant, drive belts and light bulbs; negligence, abuse or improper installation; engine damage from altering Dinan's original boost pressure; improper or contaminated fuel; collision damage; environmental damage, flood, fire or road-salt corrosion; and any vehicle operated in a competitive event or subjected to aggressive track conditions. The warranty is void if the VIN or odometer has been altered, if the vehicle was declared a total loss or salvage, or if it has been used in competition. Note that installing performance products may affect the vehicle manufacturer's own new car warranty. Because Dinan handles claims through an Authorized Dinan Dealer, if you bought it here, contact PitStopTuning and we'll file the claim with Dinan for you rather than approaching Dinan directly.

Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.

View full details

Q&A

0 answered questions

No questions yet. Be the first to ask!