Dinan
Dinan 20-26 BMW M340i/M440i (G20/G22/G23/G26) Free Flow Axleback Exhaust System - Black Tips
Dinan 20-26 BMW M340i/M440i (G20/G22/G23/G26) Free Flow Axleback Exhaust System - Black Tips
Couldn't load pickup availability
The use of quad tips also presented some additional challenges and fostered some innovation to the already visually impressive system constructed entirely of TIG welded and brushed T304 stainless steel. Confined to dual tips, the factory system utilizes only one exhaust valve and functions by eliminating the passenger side tip when the valve is closed, siphoning all gases through the muffler and out the driver's side tip for quieter operation. With the introduction of more pipes/tips, this methodology was not practical, or desired. In true Dinan M exhaust fashion, our talented engineering team decided that integrating a second valve to the system would garner the most favorable results in both symmetry and overall sound. The result is a system that incorporates larger 76mm tubing (vs 70mm stock) and allows freer flow through the entirety of the system but specifically to both outer pipes when the enlarged valves are open. The resulting flow and sound mimics an awe-inspiring straight pipe solution with a deeper and meatier tone, a defining element of all Dinan exhausts. In contradiction to the aggressiveness resulting from open valves, when the valves are closed, all gasses are forced into the muffler for sound deadening and exit the two inner tips. Regardless of valve position, the intimate nature of the interior is retained so conversation can continue without an excessively loud drone courtesy of numerous drone abatement technologies in the can. With the Dinan exhaust equipped on the M340i/M440i you get the best of both worlds, aggressive tone/sound and civility. A combination that is a paramount to any M exhaust, and now by virtue of tip count, the M340i and M440i. Welcome to the illustrious family.
While some may scoff at the feature being implemented into a "pseudo-M," the M340i/M440i, and the B58 engine platform, are extremely potent and worthy of such a distinction. The factory valance also accommodates the four massive 102mm tips perfectly, further cementing our opinion that the quad tips were destined to be on this performance model. Being numerous and big are not the only selling points to the tips however. Dinan has retained its signature straight cut tip design, safeguarding its unique and elegant styling position amongst a crowded marketplace full of angle cuts. With systems available with either black ceramic coated or polished clamp-on, and laser engraved exhaust tips, there is a version that is sure to meet your individual aesthetic needs.
Quad exhaust tips have been a signature feature of the most powerful letter in the automotive sphere for quite some time. It is a hallmark of the brand that Dinan has long embraced, limiting its own quad tip usage to those M cars that already sported like tip quantity from the factory. That is… until now with the release of the Dinan axle back exhaust system for the G20 M340i and G2x M440i.
Features
- Stock exhaust valve actuator reused and another valve/actuator added to the opposing side promoting even flow regardless of valve position
- Computer controlled exhaust valves are retained and limit noise during low speed driving and open fully during high-load conditions
- Twin exhaust valves are a whopping 76mm diameter, making them 30% less restrictive than the OE valves
- Quad 4" diameter clamp-on, double-walled, ceramic black and laser engraved exhaust tips
- Easy bolt-on installation with included mounting hardware
- Larger diameter piping for increased flow (76mm vs 70mm)
- More Power: + 6 HP @ 6600 RPM, + 5 LB-FT @ 6600 RPM
- 100% 304 stainless steel construction
- 4 lbs lighter than the stock system
- Enjoyably louder, sportier sound
Vehicle Fitment
- 2020-2026 BMW M340i
- 2020-2026 BMW M340i xDrive
- 2021-2026 BMW M440i
- 2022-2026 BMW M440i Gran Coupe
- 2021-2026 BMW M440i xDrive
- 2022-2026 BMW M440i xDrive Gran Coupe
Please verify exact fitment (engine, submodel, and trim) before purchasing.
Manufacturer Part Number: D660-0085-BLK
Images are for illustration purposes only; actual product may vary.
⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Dinan
▾
Manufacturer's Warranty — Dinan
Dinan warrants its Performance Products to be free from defects in materials and workmanship, and the term depends on the car. If the vehicle is still covered by the original manufacturer's new car limited warranty (4 years or 50,000 miles — 80,000 km in Canada — from first retail sale; US and Canadian specification vehicles only), the Dinan part is covered for the remaining term of that new car warranty, and an Authorized Dinan Dealer repairs or replaces the defective Dinan component without charge for parts or labor, including any original manufacturer component directly affected by it. If the car is out of its new car warranty, Dinan Performance Products carry a 2-year, unlimited mileage warranty from the date of original purchase; labor is reimbursed at the dealer's standard flat-rate, but repairs to affected original manufacturer components are not reimbursed. DINANTRONICS Sport, DINANTRONICS X and DINANFLASH handheld units are 1 year, unlimited mileage; refurbished products are 90 days; and racing-only parts are guaranteed against defects in workmanship only — they are not warranted against wear or failure and may affect the BMW factory and emissions warranty. Dinan's warranty is transferable when the vehicle it was installed on is sold. A lawful invoice as proof of purchase is required, and the defective part must be returned to Dinan for verification before any adjustment. Not covered: return shipping, towing and rental car charges; unauthorized modification of a Dinan part, or damage from using other manufacturers' products alongside Dinan systems; non-DCT clutch assemblies, brake rotor warp and friction materials; maintenance items such as spark plugs, filters, lubricants, fluids, coolant, drive belts and light bulbs; negligence, abuse or improper installation; engine damage from altering Dinan's original boost pressure; improper or contaminated fuel; collision damage; environmental damage, flood, fire or road-salt corrosion; and any vehicle operated in a competitive event or subjected to aggressive track conditions. The warranty is void if the VIN or odometer has been altered, if the vehicle was declared a total loss or salvage, or if it has been used in competition. Note that installing performance products may affect the vehicle manufacturer's own new car warranty. Because Dinan handles claims through an Authorized Dinan Dealer, if you bought it here, contact PitStopTuning and we'll file the claim with Dinan for you rather than approaching Dinan directly.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!