Dinan
Dinan 21-27 BMW M3/M4 (G80/G82/G83) High Flow Middle Exhaust - 3in - Stainless Steel
Dinan 21-27 BMW M3/M4 (G80/G82/G83) High Flow Middle Exhaust - 3in - Stainless Steel
Couldn't load pickup availability
This middle exhaust itself removes the hydro-formed factory center section from the secondary catalysts back to the axle back, including both resonators, and replaces it with larger 3-inch T304 stainless steel tubing for freer flowing capabilities. In place of the forward factory resonator, Dinan incorporates a beautifully crafted X-pipe made from mandrel-bent tubing for minimum restriction, unlike stamped X-pipes which are commonplace in the market. This hand-made 'X' is not only the focal point of the system in terms of aesthetics but also the star when it comes to the effects on the sound. Promoting even flow to both banks of tips, the 'X' removes unwanted nuances in sound caused by uneven exhaust flow that is present in the stock system. Along with the inherent benefit of increased volume by removal of the resonators, the Dinan X-Pipe for the G8x M3/M4 produces a louder, smoother, and fuller exhaust note that will deliver smiles time and time again.
The Dinan Middle Exhaust for the G80 M3 is and G82/G83 M4 introduces a more aggressive tone and an increase in volume over the stock system while retaining the factory muffler at a budget friendly price point. Should the desire for more arise however, it can easily be paired with the matching Dinan axle back exhaust for further aural enhancement and a more aggressive growl. It is a union that boasts a bold, yet sophisticated, exhaust note that neither can fully achieve on their own.
Looking to elevate the external acoustics of your G8x but want to upgrade in stages and/or not break the bank?
Features
- Deletes resonators between the secondary catalysts and rear muffler for increased volume
- 5-pounds lighter than the stock mid-section (Stock: 22-pounds vs. Dinan: 17-pounds)
- Includes X-pipe crossover made from mandrel bent tubing for minimum restriction
- 76mm (3-inch) tubing replaces stock 70mm (2.75-inch) tubing for free flow
- Factory-like fitment with included mounting hardware
- 100% 304 stainless steel construction
- Smoother, louder and sportier sound
Vehicle Fitment
- 2021-2027 BMW M3
- 2021-2027 BMW M4
Please verify exact fitment (engine, submodel, and trim) before purchasing.
Manufacturer Part Number: D660-0094
Images are for illustration purposes only; actual product may vary.
Emissions Note: This product is not CARB approved. It is intended for closed-course competition or off-road use only in California and other CARB states and is not legal for use on pollution-controlled vehicles in those states.
⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Dinan
▾
Manufacturer's Warranty — Dinan
Dinan warrants its Performance Products to be free from defects in materials and workmanship, and the term depends on the car. If the vehicle is still covered by the original manufacturer's new car limited warranty (4 years or 50,000 miles — 80,000 km in Canada — from first retail sale; US and Canadian specification vehicles only), the Dinan part is covered for the remaining term of that new car warranty, and an Authorized Dinan Dealer repairs or replaces the defective Dinan component without charge for parts or labor, including any original manufacturer component directly affected by it. If the car is out of its new car warranty, Dinan Performance Products carry a 2-year, unlimited mileage warranty from the date of original purchase; labor is reimbursed at the dealer's standard flat-rate, but repairs to affected original manufacturer components are not reimbursed. DINANTRONICS Sport, DINANTRONICS X and DINANFLASH handheld units are 1 year, unlimited mileage; refurbished products are 90 days; and racing-only parts are guaranteed against defects in workmanship only — they are not warranted against wear or failure and may affect the BMW factory and emissions warranty. Dinan's warranty is transferable when the vehicle it was installed on is sold. A lawful invoice as proof of purchase is required, and the defective part must be returned to Dinan for verification before any adjustment. Not covered: return shipping, towing and rental car charges; unauthorized modification of a Dinan part, or damage from using other manufacturers' products alongside Dinan systems; non-DCT clutch assemblies, brake rotor warp and friction materials; maintenance items such as spark plugs, filters, lubricants, fluids, coolant, drive belts and light bulbs; negligence, abuse or improper installation; engine damage from altering Dinan's original boost pressure; improper or contaminated fuel; collision damage; environmental damage, flood, fire or road-salt corrosion; and any vehicle operated in a competitive event or subjected to aggressive track conditions. The warranty is void if the VIN or odometer has been altered, if the vehicle was declared a total loss or salvage, or if it has been used in competition. Note that installing performance products may affect the vehicle manufacturer's own new car warranty. Because Dinan handles claims through an Authorized Dinan Dealer, if you bought it here, contact PitStopTuning and we'll file the claim with Dinan for you rather than approaching Dinan directly.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.
Q&A
No questions yet. Be the first to ask!