Dinan
Dinan 23-26 BMW M2 (G87) Valved Axleback Exhaust System - Black Tips
Dinan 23-26 BMW M2 (G87) Valved Axleback Exhaust System - Black Tips
Couldn't load pickup availability
To achieve desired sound volume and tone worthy of the G87 M2 the tubing was enlarged to 76mm (vs 70mm stock) to allow freer flow, and reduce backpressure, throughout the entirety of the system. The larger piping gives way to multiple pathways as it nears the rear of the vehicle -- the choice of which is utilized determined by the factory exhaust valves which are retained. When valves are closed, flow is directed into the Dinan muffler, where absorption and reactive technologies are used, and exit out the two inner tips. This limits noise during low-speed driving and produces a more subdued, albeit deeper, and agreeable note. However, when the valves are open during high-load conditions the bulk of the gases bypass the muffler altogether for a near straight pipe design and maximum aural enjoyment to be achieved. It's the perfect marriage for all tastes and allows civility or impassioned aggression depending on what the situation demands. The combination is one Dinan has deemed fitting for the marques signature performance models that cater to the tasteful enthusiast who demand the best for all situations.
Like its brethren, the M3 and M4, the G87 M2 is a giant leap forward from its predecessor in terms of overall performance and its capabilities. Not surprising given the latter model borrowing heavily from its older siblings' part catalog resulting in a wide swath of components being interchangeable amongst the trio. A few inlet pipe bends prevent the exhaust from being one of those but the M2 is still largely the same as the G8x M3/M4 system. This allowed the extensive drone abatement development applied on those platforms to be used on the G87, fast tracking the R&D process. The result is the introduction of another member of G8x valved axle back exhaust family that elevates the tone to a deeper, more meaningful note while also delivering an extra level of amplification above and beyond its stock counterpart.
Visually, the Dinan G87 M2 exhaust has been skillfully crafted entirely out of T304 stainless steel and TIG welded for the best visual appearance and color. The entire system is then brush finished to further guarantee an immaculate looking system out of the box. The attention to detail is not limited to parts of the system you can't see once the exhaust is installed but is also extended to the exhaust tips themselves. The Dinan exhaust includes massive, quad 4.5-inch (114mm) clamp-on, double-walled, black ceramic coated and laser engraved exhaust tips. Despite the seemingly cartoonish size on paper, the tips mesh seamlessly and fill the factory cut-outs to complete the OEM+ look with a healthy dose of audible attitude.
Features
- Stock exhaust valve actuators reused, and operation of exhaust valve is unchanged so exhaust tone can be adjusted via the M-drive settings
- Computer controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions
- Four, diffuser filling, 4.5-inch (114mm) double-walled, black ceramic coated clamp-on tips with laser engraved Dinan logo
- 6-pounds lighter than the stock axle back (Stock: 44-pounds vs. Dinan: 38-pounds)
- Drone abatement technologies used to reduce cabin resonance
- Larger diameter piping for increased flow (76mm vs. 70mm)
- Factory-like fitment with included mounting hardware
- Maximum gains of +6 HP and +5 lb-ft of torque
- 100% 304 Stainless Steel construction
- Enjoyably louder, sportier sound
Vehicle Fitment
- 2023-2026 BMW M2
Please verify exact fitment (engine, submodel, and trim) before purchasing.
Manufacturer Part Number: D660-0100-BLK
Images are for illustration purposes only; actual product may vary.
⚠ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
🛡️
Manufacturer's Warranty — Dinan
▾
Manufacturer's Warranty — Dinan
Dinan warrants its Performance Products to be free from defects in materials and workmanship, and the term depends on the car. If the vehicle is still covered by the original manufacturer's new car limited warranty (4 years or 50,000 miles — 80,000 km in Canada — from first retail sale; US and Canadian specification vehicles only), the Dinan part is covered for the remaining term of that new car warranty, and an Authorized Dinan Dealer repairs or replaces the defective Dinan component without charge for parts or labor, including any original manufacturer component directly affected by it. If the car is out of its new car warranty, Dinan Performance Products carry a 2-year, unlimited mileage warranty from the date of original purchase; labor is reimbursed at the dealer's standard flat-rate, but repairs to affected original manufacturer components are not reimbursed. DINANTRONICS Sport, DINANTRONICS X and DINANFLASH handheld units are 1 year, unlimited mileage; refurbished products are 90 days; and racing-only parts are guaranteed against defects in workmanship only — they are not warranted against wear or failure and may affect the BMW factory and emissions warranty. Dinan's warranty is transferable when the vehicle it was installed on is sold. A lawful invoice as proof of purchase is required, and the defective part must be returned to Dinan for verification before any adjustment. Not covered: return shipping, towing and rental car charges; unauthorized modification of a Dinan part, or damage from using other manufacturers' products alongside Dinan systems; non-DCT clutch assemblies, brake rotor warp and friction materials; maintenance items such as spark plugs, filters, lubricants, fluids, coolant, drive belts and light bulbs; negligence, abuse or improper installation; engine damage from altering Dinan's original boost pressure; improper or contaminated fuel; collision damage; environmental damage, flood, fire or road-salt corrosion; and any vehicle operated in a competitive event or subjected to aggressive track conditions. The warranty is void if the VIN or odometer has been altered, if the vehicle was declared a total loss or salvage, or if it has been used in competition. Note that installing performance products may affect the vehicle manufacturer's own new car warranty. Because Dinan handles claims through an Authorized Dinan Dealer, if you bought it here, contact PitStopTuning and we'll file the claim with Dinan for you rather than approaching Dinan directly.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!