• RockJock JL V6 or 2.0T or Light JT Antirock Front Sway Bar Kit (Billet Aluminum Arms, .770in Bar)
  • RockJock JL V6 or 2.0T or Light JT Antirock Front Sway Bar Kit (Billet Aluminum Arms, .770in Bar)
  • RockJock JL V6 or 2.0T or Light JT Antirock Front Sway Bar Kit (Billet Aluminum Arms, .770in Bar)
1 3

RockJock

RockJock JL V6 or 2.0T or Light JT Antirock Front Sway Bar Kit (Billet Aluminum Arms, .770in Bar)

RockJock JL V6 or 2.0T or Light JT Antirock Front Sway Bar Kit (Billet Aluminum Arms, .770in Bar)

$ 1,495.00
$ 1,644.50 $ 1,495.00
Free shipping on orders over $99 (contiguous U.S.) — flat $10.99 under $99. Shipping details
✓ In Stock • Ships from manufacturer
Ships from RockJock — this item ships direct from the manufacturer. It usually goes out quickly, but because it leaves their warehouse rather than ours, delivery can take a little longer than our in-stock parts.

RockJock Sway Bar Kit for the Jeep Gladiator and Jeep Wrangler.

Key Features

  • Sway Bar Torsion Bar (.770 in. diameter)
  • Billet Aluminum Frame Brackets
  • Billet Aluminum Sway Bar Arms
  • UHMW Sway Bar Bushings
  • Adjustable Sway Bar End Links
  • All Required Hardware
  • Rubicon Models - JL and JT Rubicon models equipped with the electronic sway bar, will require the use of a tuner (Tazer or equivalent) to turn off the sway bar dash light when the factory sway bar is removed
  • Fits JT Gladiator Models - We recommend the use of a minimum of our RJ-246101-103 kit, that features a .850 in. bar. In loaded/overlanding Gladiator applications, see our RJ-246100-103 kit with the 1 in., heavy bar
  • Fits JT Gladiator Mojave Models - This kit will work on Mojave models and bolt-on exactly the same, however, if the factory Mojave shocks are retained, the shock reservoirs will have to be relocated to allow the installation of the Antirock Sway Bar kit
  • End Links - Out of the box, the length of the sway bar’s vertical links that are included in this kit are intended for use with our suspension systems (3.5 in. lift). Additionally, all of the link rods may also be trimmed in length for fine tuning purposes
  • Fitment - It is quite common for factory frames to vary in width. If you find your vehicle's frame to be on the narrower side, the Antirock arms can simply be slid on until they are snug against the Antirock bushings and then the arms clamped down. However, on some frames the arms absolutely have to hold true width to clear bolt heads on the side of the frame, etc. In instances of this nature, see our CE-9901D-SP4 shim pack to assist in fine tuning
  • Sway Bar Disconnects - If you are installing this Antirock Sway Bar kit in place of JKS sway bar disconnects, the sway bar disconnects would have had you cut part of the sway bar link mounting bracket off of the passenger’s side of your axle housing. In this instance, to install the Antirock, you will need to replace the thru-bolt heim joint and the hardware that comes in the Antirock kit for that location with a RJ-527000-101 sealed end link rod end with stud. This studded end will then install just like the driver’s side rod end in this kit

Fits These Vehicles

  • Fits 2020-2026 Jeep Gladiator
  • Fits 2018-2026 Jeep Wrangler

Confirm the model year, the body style and the part number against your vehicle before ordering.

Specifications

  • Brand: RockJock
  • Manufacturer Part Number: RJ-246102-101
  • Type: Sway Bar Kit
  • Material: Chromoly
  • Placement on Vehicle: Front
  • Condition: New

Images are for illustrative purposes. The product you receive may differ in finish or packaging from the photograph.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer's Warranty — RockJock

RockJock (John Currie Performance Group, Inc.) warrants all items it manufactures to the original purchaser with physical proof of purchase to be free from defects in materials and workmanship for two (2) years from the stated delivery date on the invoice. The warranty is not assignable and non-transferable, and it is the sole and exclusive remedy for a product defect or failure: RockJock’s liability is limited to the cost of repair, replacement or an upgrade of the product, at RockJock’s sole discretion, and any upgrade cost is at the user’s expense. Not covered: any alteration or improper use as determined by RockJock; products that have been abused, altered, incorrectly installed or used in competition; damage caused or facilitated by the failure of non-RockJock components; and consequential costs such as labor fees, loss of use, loss of revenue, loss of time, towing fees or freight charges. Implied warranties, including merchantability and fitness for a particular purpose, are disclaimed. Contact your RockJock dealer or RockJock directly before removing any part from the vehicle. If the part appears warrantable from your description and photos, RockJock issues a Return Materials Authorization (RMA) number and the part is returned to RockJock freight prepaid; if it is found warrantable it is repaired or replaced and returned to you, and all freight charges are the customer’s responsibility. If you need a replacement part before the claim is decided, the replacement must be purchased first and is credited or refunded if the original part is deemed warrantable.

Warranty terms are set by the manufacturer and may change. Full details and claims are handled directly by RockJock. Contact us if you need help with a warranty claim.

View full details

Q&A

0 answered questions

No questions yet. Be the first to ask!