Wilwood
Wilwood D52 Front Caliper Kit - Black Powder 2.00 / 2.00in Piston 1.04in Rotor - #140-11291-BK
Wilwood D52 Front Caliper Kit - Black Powder 2.00 / 2.00in Piston 1.04in Rotor - #140-11291-BK
Couldn't load pickup availability
Wilwood's D52 Front Caliper Kit is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.00” piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Vehicles 1978 & Up (with M10-1.5 banjo bolts) will require new brake lines available below.
- D52 Caliper Upgrade Kit Install Using a 1967 Camaro
- Fitment & Installation Details
- D52 Front Caliper Kit Assembly Schematic
- Compatible Vehicles for this Brake Kit
- This Brake Kit is Compatible with the Following Vehicle Makes:
Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.
THIS BRAKE KIT HAS A HUB OFFSET OF:
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.
- Kit Components & Specifications
- D52 Caliper - Black Powder Coat
- Hat Offset Dimension (in):
- Products commonly used with this item:
- Length: 14.00 in Size: -3" style="border-width:0px;width:300px;max-width: 300" />
- Length: 14.00 in Size: -3
- Length: 16.00 in Size: -3" style="border-width:0px;width:300px;max-width: 300" />
- Length: 16.00 in Size: -3
- Length: 18.00 in Size: -3" style="border-width:0px;width:300px;max-width: 300" />
- Length: 18.00 in Size: -3
Fitment — 47 applications (click to expand)
- 1973-1975 Buick Apollo
- 1973-1989 Buick Century
- 1977-1987 Buick Electra
- 1977-1983 Buick Estate Wagon
- 1977-1990 Buick LeSabre
- 1973-1977 Buick Regal
- 1971-1978 Buick Riviera
- 1991-1996 Buick Roadmaster
- 1970-1979 Buick Skylark
- 1977-1984 Cadillac DeVille
- 1977-1996 Cadillac Fleetwood
- 1976-1979 Cadillac Seville
- 1985-2002 Chevrolet Astro
- 1981-1986 Chevrolet C10
- 1981-1986 Chevrolet C10 Suburban
- 1970-1981 Chevrolet Camaro
- 1977-1996 Chevrolet Caprice
- 1970 Chevrolet Chevelle
- 1975-1977 Chevrolet El Camino
- 1977-1985 Chevrolet Impala
- 1975-1977 Chevrolet Malibu
- 1970-1977 Chevrolet Monte Carlo
- 1969-1979 Chevrolet Nova
- 1987 Chevrolet R10
- 1987 Chevrolet R10 Suburban
- 1981-1986 GMC C1500
- 1981-1986 GMC C1500 Suburban
- 1987 GMC R1500
- 1987 GMC R1500 Suburban
- 1975-1977 GMC Sprint
- 1969-1971 Oldsmobile 442
- 1977-1984 Oldsmobile 98
- 1977-1992 Oldsmobile Custom Cruiser
- 1975-1977 Oldsmobile Cutlass
- 1975-1977 Oldsmobile Cutlass Supreme
- 1978-1985 Oldsmobile Delta 88
- 1975-1979 Oldsmobile Omega
- 1975 Oldsmobile Vista Cruiser
- 1977-1988 Pontiac Bonneville
- 1977-1981 Pontiac Catalina
- 1975-1981 Pontiac Firebird
- 1975 Pontiac Grand Am
- 1975-1977 Pontiac Grand Prix
- 1975-1977 Pontiac LeMans
- 1983-1986 Pontiac Parisienne
- 1977-1979 Pontiac Phoenix
- 1975-1977 Pontiac Ventura
- Manufacturer Part Number: 140-11291-BK
Please verify exact fitment for your vehicle before ordering.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Image shown is a representative product from the same Wilwood series; it is for reference only and the actual product will differ. Refer to the part number and specifications above.
Share
🛡️
Manufacturer's Warranty — Wilwood
▾
Manufacturer's Warranty — Wilwood
Wilwood Engineering publishes a formal Disclaimer of Warranty for its disc brakes, hubs, and racing components (datasheet DS-237). Because these parts are exposed to widely varying installation and operating conditions, Wilwood sells them “as is” and “with all faults,” and makes no warranty of any kind — expressed or implied, including no warranty of merchantability and no implied warranty of fitness for a particular purpose. Purchasers are expected to rely on their own skill and judgement to select the correct part, and it is the installer's responsibility to determine a component's suitability for the application. Racing equipment and brakes must be maintained and checked regularly for fatigue, damage, and wear. If a part arrives with a suspected manufacturing defect, contact us and we'll help you take it up with Wilwood.
Warranty terms are set by the manufacturer and may change. Contact us if you need help with a warranty claim.

Q&A
No questions yet. Be the first to ask!